Tutorials, slicer settings, and behind-the-scenes from running a 3D print farm.
Bed adhesion is the #1 cause of failed 3D prints. Here's the exact troubleshooting order we run on every printer in our farm — fixes 95% of failures in under 10 minutes.
What an STL is, what a 3MF is, and how to go from a downloaded file to a finished print without burning a roll of filament.
Wispy strings between parts of your 3D print? Here's the four-setting fix that works in Bambu Studio, OrcaSlicer, and most other slicers — without rebuilding your entire profile.
Orientation, supports, slicer settings, and a pre-flight checklist we run on every model before we send it to the printer.
Strength, heat resistance, ease, food safety, and cost — a side-by-side comparison of the three filaments you'll actually print with, from a print farm that uses tens of kilograms a month.
You don't need a $300 AMS to print multi-color. Here are four techniques — manual filament swaps, color change at layer, painting, hydro-dipping — with the exact slicer settings.
